ATJ1088 BEARING ASSY.  Nuffield Steering box bearing and carrier assembly. Genuine RHP.

This bearing is complete with self-aligning shell for Nuffield “self-aligning” steering box.

Dimensions:

Outer diameter 62 mm (2.44″)
Inside diameter 25 mm (0.984″)
Width 17mm (0.669″).

Use this bearing assembly be used in place of bearings: ATJ9334, ATJ4015, ATJ4120, ATJ4165, ATJ4186. 

Your tractor may have already been converted to this bearing and if the shell is good you will only need the INNER BEARING ATJ1088B.

Important Notes:

• When fitting the steering bearing the square edge of the outer shell should be fitted up against the circlip to prevent the bearing “popping out” the circlip.
• It is recommended that this Bearing Assembly is used in place of the factory fitted bearings found in some of the earlier tractors. See pdf. Here for a list of relevant serial numbers and their previous bearing part numbers. 

For more details view item 5 in this parts book drawing of the Nuffield Steering Column.

Suitable for tractors:

• Nuffield M3, M4 (serial number 8357 onwards)
• Nuffield DM3, DM4 (serial number 51502 onwards)
• Nuffield PM3, PM4 (serial number 75396 onwards)
• Nuffield Universal Three3DL, Universal Four 4DM (as standard)
• Nuffield 342,10/42, 4/60, 10/60 (as standard)