Marshall

FT-15 Feed Trailer

Year2024

ManufacturerMarshall

ModelFT-15 Feed Trailer

ConditionNew

Stock Number1

Marshall

FT-15 Feed Trailer

Year 2024
Manufacturer
Model FT-15 Feed Trailer
Serial Number
Year 2024
Condition New
Hours 0
Warranty
Stock Number 1
Tyres or Tracks
Front Tyre % Remaining
Rear Tyre % Remaining
Front Tyre Size
Rear Tyre Size
Cab Suspension
Engine Output
Travel Speed

Features at a Glance

  • Timber Slatted Floor – allows silage effluent to drain away
  • Removable Drawbar
  • Swinging Taildoor – enables the user to efficiently clean out unused feed
  • 3mm Angled Steel Sides – assists feeding for cattle
  • Genuine Marshall Spares – a full collection of spares are available for all models in the range

The Marshall feed trailer range combines a unique, practical design with exception built quality. In addition all our feed trailer have a number useful features integrated into the design including a timber slatted floor, removable drawbar, swinging taildoor and angled sides to assist feeding.

This 15′ trailer has 32 feed spaces.

ConstructionConstruction – Tapered sides to allow for easy feeding. Every model also benefits from a fully welded steel construction with 5mm ends and 3mm or 4mm sides.

FloorFloor – The entire range has 30mm treated pine floors, which allows effluent to escape and can easily be replaced when worn out.
Full Opening Removable Rear DoorFull Opening Removable Rear Door – Allows feed trailers to be easily cleaned out.
Retractable DrawbarRetractable Drawbar – Maximizes the number of available feed spaces.
AxlesAxles – New 6 stud 70mm beam axles are used on both models in the range.
Paint FinishPaint Finish – Since November 2011 we have shot-blasted, this is acknowledged in the paint industry as the best possible method for preparing steel for painting. The shot-blasting creates a profile for the paint to adhere to, improving adhesion and in turn the protection offered to the steel. Our five man team of trained sprayers then use the latest spraying equipment to finish our products with a dual layer paint finish. Every machine is finished with 80 microns of high-build primer and 50 microns of gloss polyurethane; this combination provides excellent protection and a high-quality finish.